Repair Process

  1. Estimate the Damage. The vehicle is inspected and relevant data is entered into our estimate computer system. This data is compiled into an estimate that determines the cost of repairs. However, often there is hidden damage that cannot be seen until after the vehicle is disassembled.
  2. Get Insurance Approval. Once the estimate is completed, the insurance company will review the estimate. There may be some negotiations on the price and procedures required to repair the vehicle. The insurance company will determine if the vehicle is even repairable. Once this process is completed, the vehicle begins the actual repair process.
  3. Disassemble the Vehicle. In Dis-assembly, hidden damage is often found, and inner structure repairs are determined. Many times this will require scheduling insurance re-inspection and ordering additional parts.
  4. Order the Parts. The required parts for your vehicle are ordered, and availability is checked. If a part needs to be special ordered, the order will be placed as soon as possible. Although many parts may arrive quickly, the repair process cannot begin until the shop receives all of the structural parts.
  5. Complete Structural Repairs. In the Structure Repair area, the body structure is returned back to the factory specification.
  6. Complete Body Repairs. The Body Repair Departments replaces exterior panels, and all metal finishing that may be required. The vehicle begins to come back to life as sheet metal is installed and aligned. From here the vehicle will go to the paint preparations department.
  7. Prime & Paint. Paint Preparation is a critical step in the refinishing process of every vehicle. All panels are prepared for the paint, then primed and sealed to assure good adhesion when the final top color and clear coats of paint are applied.
  8. Reassemble the Vehicle. Final moldings and detail pieces are put back on the vehicle.  All the vehicle’s systems are checked during this process. The vehicle is almost complete and ready for delivery when it is in this stage.
  9. Inspect & Wash. During the repair process the vehicle accumulates dust from the repairs. It will be cleaned and the vehicle will also be road tested to ensure that everything is working properly. A final inspection will assure that the vehicle is restored to its pre-accident condition.
  10. Vehicle Pick Up. Delivery is the last step in the repair process. When the customer arrives to pick up the vehicle, the bill is explained and the final paperwork is completed. The customer drives away in the vehicle that has been restored to its pre-accident condition.